Charles C. Mosher
Biography 2019 (updated to 2020) 
Charles Mosher received B.S. (1978), M.S. (1979), and Ph.D. (1980) degrees from the University of Minnesota, Department of Geology and Geophysics. He began his career as a geophysicist with ARCO Oil and Gas Company in 1980, where he held research and management positions in the Geophysical Research and Information Technology departments. From 2000 to 2003, he worked for Chevron as a research geophysicist. In 2003, he joined ConocoPhillips as a geoscience fellow in the subsurface technology organization. His areas of expertise include the design and execution of projects in seismic data acquisition, processing, and imaging. His current research interests include compressive sensing, seismic survey design, and seismic processing and imaging. He is currently the ConocoPhillips representative for a number of university consortia. In 2017, ConocoPhillips awarded him its inaugural Individual Lifetime Achievement SPIRIT Award, honoring his outstanding technological contributions to the company and the industry. Mosher received the SEG Reginald Fessenden Award (with Felix Herrmann) for their work in randomized survey design and wavefield reconstruction via sparse inversion.
The 2020 SEG Reginald Fessenden Award 
Felix Herrmann has focused his research and consortium on compressive sensing and sparse inversion for many years, and he and his students have suggested applications involving seismic acquisition, processing, and imaging. Motivated by rendering harmful sub-sampling related aliases into incoherent noise through randomized sampling, Moser derisked this technology and improved acquisition productivity substantially via randomized survey design and wavefield reconstruction via sparse inversion. This breakthrough is a great example of how academic research can help drive innovations in our industry.
Biography Citation for the 2020 SEG Reginald Fessenden Award
It is our great pleasure to introduce Charles (Chuck) Mosher of ConocoPhillips and Felix Herrmann of Georgia Institute of Technology as the 2020 SEG Reginald Fessenden Award winners, recognizing their pioneering work in the development and application of compressive sensing (CS) in seismology. Borrowing from electrical engineering and mathematics, they have shown how new theories can be utilized to efficiently acquire higher-quality seismic surveys at costs much lower than that afforded by traditional methods. These two award winners did not directly work together but both benefitted from each other’s contributions and set an exemplary example of how technical success can be achieved by the interaction between academia and industry. Their efforts are establishing the new paradigm for seismic acquisition, and their innovations are deserving of this prestigious award.
Such concepts as sampling interval and aliasing have been well established, but these concepts are based on regularly discretizing a continuous signal. Irregular sampling allows CS to avoid the traditional Nyquist criteria of sampling two points per wavelength to eliminate aliasing. This opens the possibility for sparser sampling while maintaining or enhancing bandwidth and managing incoherently aliased energy. This is the basic premise of CS, but there are significant hurdles in implementing any new approach for effective use in the field. Questions such as how to acquire irregularly sampled field data, represent it in a compressed form, deblend simultaneous sources, and perform a sparse inversion to reconstruct the desired output data are among the key challenges Chuck and Felix have addressed successfully.
While a professor at the University of British Columbia, Felix led the industry-supported SINBAD consortium from 2005 to 2017. The focus of this consortium was on applications of CS for cost reduction of seismic acquisition, seismic processing, and seismic imaging. Felix and his colleagues addressed sampling- related cost of seismic acquisition by using CS wavefield reconstruction methods based on randomized sampling techniques and simultaneous shooting in land and marine acquisitions. Through several publications, he and his team demonstrated that a signal can be represented sparsely, interference (aliasing) can be rendered into incoherent noise by random sampling, and a nontraditional optimization algorithm can recover the desired signal from the sparse representation. Key areas in which Felix has contributed are: seismic data processing, wave equation imaging, and full-waveform inversion (FWI). In seismic processing, he has shown that multidimensional data can either be sparsely represented using a curvelet transform or in low-rank factored form. Given these structured representations, Felix demonstrated how seismic wavefields can be reconstructed from severe undersamplings by promoting structure via optimization. He showed how to represent primary reflections with a sparse spike inversion, which also draws on new techniques from modern convex optimization. In wave equation imaging, he has shown how statistical sampling of shots, in combination with curvelet-domain sparsity promotion, can yield impressive cost reductions of reverse time migration and FWI. He and his team also were responsible for the development of wavefield reconstruction inversion, a new technique designed to mitigate the impact of local minima. Finally, he was selected as the SEG 2019 first-quarter/second- quarter Distinguished Lecturer to present “Sometimes it pays to be cheap — Compressive time-lapse seismic data acquisition,” which focuses on obtaining repeatable time- lapse data without insisting on replication in the field.
Chuck and his team at ConocoPhillips have also made significant advances that are currently realizing the potential of CS in acquisition and processing. Chuck extends the windowed Fourier transform to a fast generalized windowed transform by introducing fractional decimation concepts to overcome sub-band aliasing artifacts, and this provides a sparse transform to represent data with fewer samples. Chuck et al. developed nonuniform optimal sampling for choosing nonuniform sensor locations for seismic survey planning and prove that the new sampling strategy makes it possible to recover significantly broader spatial bandwidth than could be obtained using uniform sampling. CS data reconstruction is an important step, and Chuck et al. developed an effective seismic data reconstruction workflow. They also introduced a novel optimization algorithm for data reconstruction, which adapts the alternating direction method with a variable- splitting technique to recover a sparse representation of the seismic data. Source deblending is an important step, and they have demonstrated how this can improve seismic data quality with reduced acquisition time and cost. To date, ConocoPhillips and its business partners have acquired 17 CS data sets globally, including ocean- bottom node/cable, narrow-azimuth marine streamer, and land vibroseis surveys. For all the finished processing projects, the imaging results from the CS surveys exceeds the quality of legacy or neighboring surveys with traditional designs. The paradoxical result is that CS theory produces higher data quality at lower cost and in shorter time frames than would be achieved with equivalent traditionally sampled survey designs. To date, global deployments of CS technology in production have led to direct acquisition cost savings of more than US$165 million and indirect cost savings of US$180 million from optimized drilling decisions.
Both of the recipients have dedicated their entire careers to geophysical research, and they have always been active, enthusiastic, and visionary. Their reputations as distinguished geophysical innovators are well recognized in our community, earning them the distinction of the 2020 Reginald Fessenden Award.
- Contributors, Geophysics Vol. 84 Issue 3, P. Z13-Z16.
- Honors and Awards Program, SEG 2020, 13 Oct 2020, Houston