Difference between revisions of "Rms amplitude AGC"

From SEG Wiki
Jump to: navigation, search
(added content)
(No difference)

Revision as of 12:43, 5 August 2014

Seismic Data Analysis
Series Investigations in Geophysics
Author Öz Yilmaz
DOI http://dx.doi.org/10.1190/1.9781560801580
ISBN ISBN 978-1-56080-094-1
Store SEG Online Store

The rms amplitude AGC gain function is based on the rms amplitude within a specified time gate on an input trace. This gain function is computed as follows. The input trace is subdivided into fixed time gates. First, the amplitude of each sample in a gate is squared. Second, the mean of these values is computed and its square root is taken. This is the rms amplitude over that gate. The ratio of a desired rms amplitude (say 2000) to the actual rms value is assigned as the value of the gain function at the center of the gate. Hence, the scaling function g(t) at the gate center is given by


where xi is the trace amplitude and N is the number of samples within the gate.

Typically, we start out with a certain gate length at the shallow part of the trace. Gate length can be kept either constant or it can be increased systematically down the trace. At each gate center, the value of the gain function is computed as described above. Function g(t) then is interpolated between the gate centers. Note that the specified time gates are stationary — they do not slide down the trace.

Figure 1.4-10 shows the ungained data and two rms-gained sections. The gate lengths are indicated at the top of each panel. When the gate used in the computation is kept small, say 64 ms, then strong reflections become less distinct.

See also


External links

find literature about
Rms amplitude AGC
SEG button search.png Datapages button.png GeoScienceWorld button.png OnePetro button.png Schlumberger button.png Google button.png AGI button.png