Difference between revisions of "Porosity in Carbonate"

From SEG Wiki
Jump to: navigation, search
(Added more details about Carbonate Porosity)
 
Line 9: Line 9:
 
== Types of Primary Porosity ==
 
== Types of Primary Porosity ==
  
=== '''Interparticle porosity''' ===
+
=== Interparticle porosity ===
 
Porosity between particles. It is seldom preserved because of porosity loss by cementation.
 
Porosity between particles. It is seldom preserved because of porosity loss by cementation.
  
=== '''Intraparticle porosity''' ===
+
=== Intraparticle porosity ===
 
Porosity within the particles of grains
 
Porosity within the particles of grains
  
=== '''Intra crystal porosity''' ===
+
=== Intra crystal porosity ===
 
Porosity within the individual crystals.
 
Porosity within the individual crystals.
  
 
== Types of Secondary Porosity ==
 
== Types of Secondary Porosity ==
  
=== '''Fenestral Porosity''' ===
+
=== Fenestral Porosity ===
 
Lensed shaped or globular sparry carbonate cement formed chiefly by the decay of sediment covered algal mats, shrinkage during drying and accumulation of pockets of gas or water.  
 
Lensed shaped or globular sparry carbonate cement formed chiefly by the decay of sediment covered algal mats, shrinkage during drying and accumulation of pockets of gas or water.  
  
=== '''Shelter porosity''' ===
+
=== Shelter porosity ===
 
It is a type of primary interparticle porosity created by the shattering effect of relatively large sedimentary particles which prevent in filling of pore space beneath them by finer clastic particle.
 
It is a type of primary interparticle porosity created by the shattering effect of relatively large sedimentary particles which prevent in filling of pore space beneath them by finer clastic particle.
  
=== '''Growth framework porosity''' ===
+
=== Growth framework porosity ===
 
Primary porosity created by the in place growth of a carbonate rock framework.
 
Primary porosity created by the in place growth of a carbonate rock framework.
  
=== '''Moldic  Porosity''' ===
+
=== Moldic  Porosity ===
 
A  pore formed  by  selective  removal   by   solution  from an original shell oolite etc
 
A  pore formed  by  selective  removal   by   solution  from an original shell oolite etc
  
 
=== Fracture Porosity ===
 
=== Fracture Porosity ===
 
Porosity Generated due to fracturing in the rock strata.
 
Porosity Generated due to fracturing in the rock strata.

Latest revision as of 12:14, 23 June 2020

Carbonate Rocks exhibit a different type of Porosity as compared to the Clastic Rocks. The Porosity are divided into Primary and Secondary Porosity on the Basis of their time of Formation.

Type of Porosity

Pore types in carbonate rocks can generally be classified on the basis of the timing of porosity evolution into:

  • primary pores (or depositional porosity), which are pores inherent in newly-deposited sediments and the particles that comprise them. Such pore types include interparticle pores in, for example, carbonate sands (but also in muddy carbonates), intraparticle pores (within particles such as foraminifera or gastropod shells), fenestral pores (formed by gas bubbles and sediment shrinkage in tidal-flat carbonates), and shelter and growth- framework pores (common in reef buildups);
  • secondary pores, which are those that form as a result of later, generally post-depositional dissolution. Such pore types include all of those mentioned above, but only when it can be demonstrated that primary pores which subsequently were occluded by cement later had all or some of that cement dissolved (resulting in the generation of exhumed pores -Figure 2), as well as vugs (large pores that transect rock fabric, that is, dissolution was not fabric-selective) and dissolution-enlarged fractures. Most of these primary and secondary pore types can readily be identified in cores, and with the possible exception of shelter and growth-framework pores, also in well cuttings samples.

Types of Primary Porosity

Interparticle porosity

Porosity between particles. It is seldom preserved because of porosity loss by cementation.

Intraparticle porosity

Porosity within the particles of grains

Intra crystal porosity

Porosity within the individual crystals.

Types of Secondary Porosity

Fenestral Porosity

Lensed shaped or globular sparry carbonate cement formed chiefly by the decay of sediment covered algal mats, shrinkage during drying and accumulation of pockets of gas or water.

Shelter porosity

It is a type of primary interparticle porosity created by the shattering effect of relatively large sedimentary particles which prevent in filling of pore space beneath them by finer clastic particle.

Growth framework porosity

Primary porosity created by the in place growth of a carbonate rock framework.

Moldic  Porosity

A  pore formed  by  selective  removal   by   solution  from an original shell oolite etc

Fracture Porosity

Porosity Generated due to fracturing in the rock strata.