Interval velocities

From SEG Wiki
Revision as of 14:44, 4 March 2019 by Ageary (talk | contribs) (added page)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Problem 5.15

An survey gives the stacking velocity results in Table 5.15a. Calculate the interval velocities.

Table 5.15a. survey results.
1 1.20 1.100 2.18
2 2.50 1.786 2.80
3 3.10 1.935 3.20
4 4.10 2.250 3.64


In equation (4.13a), the sum is the traveltime down to the base of the layer, that is, . Therefore equation (4.13a) can be written


If we write and for the rms velocity and traveltime down to the base of the layer, and for the same quantities down to the top of the layer, we can get an equation for the interval velocity in the bed by subtracting expressions for and obtained from equation (5.15a). The result is



We assume horizontal velocity layering so that the values of in Table 5.15a are approximate values of (see Table 5.12b) and therefore we can use equation (5.15b) to find interval velocities. We take 2.18 km/s as the interval velocity from the surface to the first reflector. We now calculate the interval velocities to :

Continue reading

Previous section Next section
Well-velocity survey Finding velocity
Previous chapter Next chapter
Geometry of seismic waves Characteristics of seismic events

Table of Contents (book)

Also in this chapter

External links

find literature about
Interval velocities
SEG button search.png Datapages button.png GeoScienceWorld button.png OnePetro button.png Schlumberger button.png Google button.png AGI button.png