Difference between revisions of "Geophone"

From SEG Wiki
Jump to: navigation, search
(VM 7.23.20)
(VM 7.23.20)
 
(20 intermediate revisions by the same user not shown)
Line 1: Line 1:
 
{{Virtual Museum table
 
{{Virtual Museum table
|Taxonomy=IMG2178
+
|Taxonomy=IMG2188
 
|Item=Geophone
 
|Item=Geophone
|Serial number=NMI-27
+
|Serial number=NMI-37
 
|Donor=Charlie Klutts
 
|Donor=Charlie Klutts
 
|Location=HGC
 
|Location=HGC
 
}}
 
}}
#27. NMI. Brass case is solder sealed. White metal cap is press-in and contains molded rubber preform stamped with numbers 155. The numbers 7 62 are stamped on side of case at bottom - possibly a date stamp. Unit was originally enclosed over top and partially down the side with orange molded rubber, which disintegrated during the cleanup process.
+
#37. NML Pendulum Cone Detector -Dr. Eugen Merten – Shell (circa 1950) Cone assembly in center pivots at bottom and, at top, has a wire wound coil which moves horizontally through a permanent magnet Stamped on top of the case is a triangle containing the letter L at top and the numbers 652 at bottom. Below the triangle is stamped MADE IN USA. A assembled cutaway unit is the basic unit removed from case. A horseshoe style magnet, mechanical magnification of motion, long moment arm, (shaped like a cone). Single leaf spring, small moving coil, adjustable resonant frequency, large voltage output, 7.4lbs.
  
[[File:GSH_ IMG2178.jpg|300px]]
+
[[File:GSH_ IMG2188.jpg|300px]]

Latest revision as of 12:05, 23 July 2020

Item Geophone
Item code
Description
Manufacturer
Circa
Model
Donor Charlie Klutts
Location HGC
Serial number NMI-37"NMI" can not be assigned to a declared number type with value -37.
Taxonomy IMG2188
  1. 37. NML Pendulum Cone Detector -Dr. Eugen Merten – Shell (circa 1950) Cone assembly in center pivots at bottom and, at top, has a wire wound coil which moves horizontally through a permanent magnet Stamped on top of the case is a triangle containing the letter L at top and the numbers 652 at bottom. Below the triangle is stamped MADE IN USA. A assembled cutaway unit is the basic unit removed from case. A horseshoe style magnet, mechanical magnification of motion, long moment arm, (shaped like a cone). Single leaf spring, small moving coil, adjustable resonant frequency, large voltage output, 7.4lbs.

GSH IMG2188.jpg