Difference between revisions of "Dictionary:Q(Quality)"

From SEG Wiki
Jump to: navigation, search
(removed search template for workshop)
(added internal link)
Line 1: Line 1:
 
{{DISPLAYTITLE:Dictionary:''Q''}}{{#category_index:Q|''Q''}}
 
{{DISPLAYTITLE:Dictionary:''Q''}}{{#category_index:Q|''Q''}}
'''1'''. Quality factor, the ratio of 2π times the peak energy to the energy dissipated in a cycle; the ratio of 2π times the power stored to the power dissipated. The seismic ''Q'' of rocks is of the order of 50 to 300. ''Q'' is related to other measures of absorption (see below):  
+
'''1'''. Quality factor, the ratio of 2π times the [[peak energy]] to the energy dissipated in a cycle; the ratio of 2π times the power stored to the power dissipated. The seismic ''Q'' of rocks is of the order of 50 to 300. ''Q'' is related to other measures of absorption (see below):  
  
 
<center><math>\frac{1}{Q} = \frac{\alpha V}{\pi f} = \frac{\alpha \lambda}{\pi} = \frac{hT}{\pi} = \frac{\delta}{\pi} = \frac{2\Delta f}{f_\mathrm{r}} </math></center>
 
<center><math>\frac{1}{Q} = \frac{\alpha V}{\pi f} = \frac{\alpha \lambda}{\pi} = \frac{hT}{\pi} = \frac{\delta}{\pi} = \frac{2\Delta f}{f_\mathrm{r}} </math></center>

Revision as of 14:19, 9 March 2015

1. Quality factor, the ratio of 2π times the peak energy to the energy dissipated in a cycle; the ratio of 2π times the power stored to the power dissipated. The seismic Q of rocks is of the order of 50 to 300. Q is related to other measures of absorption (see below):

where V, f, λ, and T are, respectively, velocity, frequency, wavelength, and period.[1] The absorption coefficient α is the term for the exponential decrease of amplitude with distance because of absorption; the amplitude of plane harmonic waves is often written as

where x is the distance traveled. The logarithmic decrement δ is the natural log of the ratio of the amplitudes of two successive cycles. The last equation above relates Q to the sharpness of a resonance condition; fr is the resonance frequency and is the change in frequency that reduces the amplitude by . The damping factor h relates to the decrease in amplitude with time,


Absorption terminology. Sometimes this terminology is used for attenuation because of factors other than absorption. E = energy, = energy lost in one cycle, = wavelength, f = frequency, x = distance, t = time, , .[2]

2. The ratio of the reactance of a circuit to the resistance.

3. A term to describe the sharpness of a filter; the ratio of the midpoint frequency to the bandpass width (often at 3 dB).

4. A designation for Love waves (q.v.).

5. Symbol for the Koenigsberger ratio (q.v.).

6. See Q-type section.

See also

References

  1. Sheriff, R. E. and Geldart, L. P., 1995, Exploration Seismology, 2nd Ed., Cambridge Univ. Press.
  2. Sheriff, R.E., 1989, Geophysical methods, pg. 330: Prentice Hall Inc.