Characteristics of different types of events and noise

From SEG Wiki
Revision as of 12:33, 15 May 2019 by Ageary (talk | contribs) (Also in this chapter: fixed page)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

Problem 6.1

Classify the different types of events and noise in Table 6.1a on the basis of commonly observed characteristics on a seismic record.

Figure 6.1a.  Characteristics of events.
Figure 6.1b.  Characteristics of events.


A wave is coherent when it appears on successive traces in a systematic way and with approximately the same waveshape. Apparent-velocity filtering, also called apparent-dip filtering, refers to discrimination (attenuation) based on the slope of a linear alignment of traces across a section (see problem 9.25). Frequency filtering refers to attenuation of certain frequencies relative to other frequencies (see problems 7.11 and Sheriff and Geldart, 1995, Section 9.5.10). Arrays, discussed in Sheriff and Geldart (1995, Section 8.3.5 to Section 8.3.9) discriminate on the basis of apparent wavelength. Common-midpoint (CMP) stacking is discussed in Sheriff and Geldart, 1995, Section 8.3.3. Muting involves setting to zero the parts of traces prior to a certain ‘mute schedule.’ Three-component recording uses geophones that respond to motion along three different orthogonal axes, e.g., north-south, east-west, and vertical.


In Table 6.1b we assume that the dimensions are those commonly used, that “distinctive apparent velocity” means apparent velocity within certain limits, that structural and other changes are generally small, that the 3-component phones are on bedrock rather than on top of a low-velocity layer. Usually only wind noise and other nearly random background noises are incoherent and all source-generated events are predictable trace-to-trace and repeatable. CMP stacking should attenuate events that do not have the same hyperbolic relationship (see problem 4.1a) and stacking velocity as the primary reflections. In Table 6.1b, (1) indicates that the attenuation will be mainly that of the diffraction tails, (2) indicates that reflected refractions from off to the side of the line may have hyperbolic curvature, and (3) indicates that Love waves are dispersive.

Continue reading

Previous section Next section
Effect of time picks, NMO stretch, and datum choice on stacking velocity Horizontal resolution
Previous chapter Next chapter
Geometry of seismic waves Characteristics of seismic events

Table of Contents (book)

Also in this chapter

External links

find literature about
Characteristics of different types of events and noise
SEG button search.png Datapages button.png GeoScienceWorld button.png OnePetro button.png Schlumberger button.png Google button.png AGI button.png