From SEG Wiki
Revision as of 15:56, 12 July 2016 by Aref.sherif (talk | contribs) (small intro)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to: navigation, search

In seismic exploration broadband refers to a wider band of frequencies being recorded than in conventional seismic exploration.

In the marine case the conventional acquisition system is said to give a usable bandwidth of typically between 8–80 Hz, whereas broadband seismic systems are claimed to give usable frequencies from as low as 2.5 Hz up to 200 Hz or more for shallow targets. On land, marine vibrators today can produce signal frequencies down to 1.5 Hz.

Low frequency data provides deeper penetration useful for imaging deep targets, and provides greater stability in inversion. Broader bandwidths produce sharper detailed definition. Both low and high frequencies are required for high-resolution imaging of important shallow features such as thin beds and small sedimentary traps.


Broadband marine seismic data is evolving as the new standard in petroleum geoscience, recent interest in broadband seismic, and especially the low frequencies end, has triggered several seismic acquisition solutions. Increasing the bandwidth of the seismic signal in the low end of the frequency spectrum improves penetration and resolution in reflection seismic data, and it is beneficial in waveform and impedance inversion.